View MPIC2112_178456.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MPIC2112/D
Power Products Division
HIGH AND LOW SIDE DRIVER
The MPIC2112 is a high voltage, high speed, power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates from 10 to 600 volts.
MPIC2112
HIGH AND LOW SIDE DRIVER
14 1
* * * * * * * * * * * * *
Floating Channel Designed for Bootstrap Operation Fully Operational to +600 V Tolerant to Negative Transient Voltage dV/dt Immune Gate Drive Supply Range from 10 to 20 V Undervoltage Lockout for Both Channels Separate Logic Supply Operating Supply Range from 5 to 20 V Logic and Power Ground Operating Offset Range from -5 to +5 V CMOS Schmitt-triggered Inputs with Pull-down Cycle by Cycle Edge-triggered Shutdown Logic Matched Propagation Delay for Both Channels Outputs in Phase with Inputs
P SUFFIX PLASTIC PACKAGE CASE 646-06
16
1
DW SUFFIX PLASTIC PACKAGE CASE 751G-02 SOIC - WIDE
ORDERING INFORMATION
Device MPIC2112DW MPIC2112P Package SOIC WIDE PDIP
PRODUCT SUMMARY
VOFFSET IO+/- VOUT ton/off (typical) Delay Matching 600 V MAX 200 mA/400 mA 10 - 20 V 125 & 105 ns 30 ns
PIN CONNECTIONS
(TOP VIEW) 8 9 10 11 12 13 14 VDD HIN SD LIN VSS VCC COM LO HO VB VS 7 6 5 4 3 2 1 9 10 11 12 13 14 15 16 14 LEADS PDIP MPIC2112P 16 LEADS SOIC (WIDE BODY) MPIC2112DW VDD HIN SD LIN VSS VCC COM LO HO VB VS 8 7 6 5 4 3 2 1
(c) Motorola Power Motorola, Inc. 1996
Products Division Technical Data
1
MPIC2112
SIMPLIFIED BLOCK DIAGRAM
VB VDD RQ S HIN VDD/VCC LEVEL SHIFT HV LEVEL SHIFT PULSE GEN UV DETECT PULSE FILTER R R S Q HO
VS VCC
SD UV DETECT
LIN RQ VSS S
VDD/VCC LEVEL SHIFT
LO DELAY COM
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air conditions. Rating High Side Floating Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Supply Voltage Logic Supply Offset Voltage Logic Input Voltage (HIN, LIN & SD) Allowable Offset Supply Voltage Transient *Package Power Dissipation @ TA +25C Thermal Resistance, Junction to Ambient Operating and Storage Temperature Lead Temperature for Soldering Purposes, 10 seconds (14 Lead DIP) (16 SOIC-WIDE) (14 Lead DIP) (16 SOIC-WIDE) Symbol VB VS VHO VCC VLO VDD VSS VIN dVS/dt PD - RJA Tj, Tstg TL Min -0.3 VB-25 VS-0.3 -0.3 -0.3 -0.3 VCC-25 VSS-0.3 - - - - - -55 - Max 625 VB+0.3 VB+0.3 25 VCC+0.3 VSS+25 VCC+0.3 VDD+0.3 50 1.6 1.25 75 100 150 260 Unit VDC
V/ns Watt C/W C C
RECOMMENDED OPERATING CONDITIONS
The Input/Output logic timing Diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset ratings are tested with all supplies biased at 15 V differential. High Side Floating Supply Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Supply Voltage Logic Supply Offset Voltage Logic Input Voltage (HIN, LIN & SD) Ambient Temperature VB VS VHO VCC VLO VDD VSS VIN VS+10 Note 1 VS 10 0 VSS+5 -5 VSS -40 VS+20 600 VB 20 VCC VSS+20 5 VDD 125 C V
TA Note 1: Logic operational for VS of -5 to +600 V. Logic state held for VS of -5 V to -VBS.
2
Motorola Power Products Division Technical Data
MPIC2112
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise specified)
Characteristic Symbol Min Typ Max Unit STATIC ELECTRICAL CHARACTERISTICS - SUPPLY CHARACTERISTICS VBIAS (VCC, VBS, VDD) = 15 V and VSS = COM unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO and IO parameters are referenced to COM or VSS and are applicable to the respective output leads: HO or LO. Logic "1" Input Voltage Logic "0" Input Voltage High Level Output Voltage, VBIAS-VO @ VIN = VIH, IO = 0 A Low Level Output Voltage, VO @ VIN = VIL, IO = 0 A Offset Supply Leakage Current @ VB = VS = 600 V Quiescent VBS Supply Current @ VIN = 0 V or VDD Quiescent VCC Supply Current @ VIN = 0 V or VDD Quiescent VDD Supply Current @ VIN = 0 V or VDD Logic "1" Input Bias Current @ VIN = 15 V Logic "0" Input Bias Current @ VIN = 0 V VBS Supply Undervoltage Positive Going Threshold VBS Supply Undervoltage Negative Going Threshold VCC Supply Undervoltage Positive Going Threshold VCC Supply Undervoltage Negative Going Threshold Output High Short Circuit Pulsed Current @ VOUT = 0 V, VIN = 15 V, PW 10 s Output Low Short Circuit Pulsed Current @ VOUT = 15 V, VIN = 0 V, PW 10 s VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IIN- VBSUV+ VBSUV- VCCUV+ VCCUV- IO+ IO- 9.5 - - - - - - - - - 7.4 7.0 7.6 7.2 200 420 - - - - - 25 80 2.0 20 - - - - - 250 500 - 6.0 100 100 50 60 180 5.0 40 1.0 9.6 9.2 9.6 9.2 mA - - V A mV V
DYNAMIC ELECTRICAL CHARACTERISTICS VBIAS (VCC, VBS, VDD) = 15 V and VSS = COM unless otherwise specified. TA = 25C. Turn-On Propagation Delay @ VS = 0 V Turn-Off Propagation Delay @ VS = 600 V Shutdown Propagation Delay @ VS = 600 V Turn-On Rise Time @ CL = 1000 pF Turn-Off Fall Time @ CL = 1000 pF Delay Matching, HS & LS Turn-On/Off ton toff tsd tr tf MT - - - - - - 125 105 105 80 40 - 180 160 160 130 65 30 ns
TYPICAL CONNECTION
10 TO 600 V
VDD HIN SD LIN VSS VCC
VDD HIN SD LIN VSS
HO VB VS VCC COM LO
TO LOAD
Motorola Power Products Division Technical Data
3
MPIC2112
LEAD DEFINITIONS
Symbol VDD HIN SD LIN VSS VB HO VS VCC LO COM Logic Supply Logic Input for High Side Gate Driver Output (HO), In Phase Logic Input for Shutdown Logic Input for Low Side Gate Driver Output (LO), In Phase Logic Ground High Side Floating Supply High Side Gate Drive Output High Side Floating Supply Return Low Side Supply Low Side Gate Drive Output Low Side Return Lead Description
HIN LIN
HIN LIN ton
50% tr 90%
50% toff 90% 10% tf
SD HO LO HO LO
10%
Figure 1. Input / Output Timing Diagram
Figure 2. Switching Time Waveform Definitions
50% SD tsd HO LO 90%
HIN LIN
50%
50%
LO
HO 10%
MT 90% LO
MT
HO
Figure 3. Deadtime Waveform Definitions
Figure 4. Delay Matching Waveform Definitions
4
Motorola Power Products Division Technical Data
MPIC2112
PACKAGE DIMENSIONS
NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M N INCHES MIN MAX 0.715 0.770 0.240 0.260 0.145 0.185 0.015 0.021 0.040 0.070 0.100 BSC 0.052 0.095 0.008 0.015 0.115 0.135 0.300 BSC 0_ 10_ 0.015 0.039 MILLIMETERS MIN MAX 18.16 19.56 6.10 6.60 3.69 4.69 0.38 0.53 1.02 1.78 2.54 BSC 1.32 2.41 0.20 0.38 2.92 3.43 7.62 BSC 0_ 10_ 0.39 1.01
14
8
B
1 7
A F C N H G D
SEATING PLANE
L
J K M
CASE 646-06 ISSUE L
-A-
16 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN EXCESS OF D DIMENSION AT MAXIMUM MATERIAL CONDITION. MILLIMETERS MIN MAX 10.15 10.45 7.40 7.60 2.35 2.65 0.35 0.49 0.50 0.90 1.27 BSC 0.25 0.32 0.10 0.25 0_ 7_ 10.05 10.55 0.25 0.75 INCHES MIN MAX 0.400 0.411 0.292 0.299 0.093 0.104 0.014 0.019 0.020 0.035 0.050 BSC 0.010 0.012 0.004 0.009 0_ 7_ 0.395 0.415 0.010 0.029
-B-
1 8
8X
P 0.010 (0.25)
M
B
M
16X
D
M
J TA
S
0.010 (0.25)
B
S
F R X 45 _ C -T-
14X DIM A B C D F G J K M P R
G
K
SEATING PLANE
M
CASE 751G-02 ISSUE A
Motorola Power Products Division Technical Data
5
MPIC2112
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
6
MPIC2112/D Motorola Power Products Division Technical Data
*MPIC2112/D*

▲Up To Search▲

Price & Availability of MPIC2112

	To Download MPIC2112 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .